![]() If new and/or old wood is extremely dry and weathered, the Traditional Swedish Falu Style Paint may begin to appear paler within a short time, meaning it may be necessary to apply an additional coat(s) of Viking Purified Raw Linseed Oil. Follow mixing instructions or mix stored paint well before use and apply as directed. A face mask or respirator is suggested when removing pigment, dust, mold/mildew, etc. Use soft brush or microfiber cloth to wipe away any debris or fine dust. Do not power wash! Too much moisture is introduced to the wood with this method. If any mildew is present, apply Linseed Oil Soap directly to surface. Loose paint or dirt should be brushed off with wire-brush or scrub pad. Old timber or when repainting is needed the wood surface should always be cleaned first for proper adhesion. Follow mixing instructions and apply as directed. New timber should be wiped clean of dirt and dust. Keep areas covered for several days until paint is completely dry. Can be cleaned with Linseed Oil Soap if needed. Oil and paint will be challenging to remove from brick, stone, cement, etc. with some kind of sheeting or drop cloth. To prep, cover foundation, gutters, windows, etc. These areas can also be spot painted if needed. Typically, two coats are required as the first coat may not fully cover nail heads and knots in timber. Apply thin, even coats with a stiff natural bristle brush. Traditional Swedish Falu Style Paint will adhere to any new, clean, dry wood surface, as well as a clean surface previously painted with a Swedish Falu Style Paint. In Linseed Oil Paint for a semi-gloss finish, consider Ottossonįalu Red Linseed Oil Paint. Work with high-quality Viking Purified Raw Linseed Oil with Falu Style Paint for best results.įor application on previously painted surfaces or for a comparable option available Note: Avoid generic linseed oil from the hardware store as this may lead to drying issues or mildew growth. Never use with a conventional, chemically treated linseed oil or paint over alkyd, acrylic, or other petrochemical based coatings. It does not peel, crack, trap moisture or cause wood rot. Very durable with impressive UV protection, the Traditional Falu Style Paint is safe to use, safe for the environment, and easy to maintain over time. New timber and/or wood previously painted with a Swedish Falu Style Paint. Ideal for exterior rough and smooth cut wood surfaces, especially barns, cottage style architecture, and outbuildings. MixingĪnd application instructions included with order. recipe only).Ĭoverage: 11 lb bag of black dry powder makes approximatelyĢ0 liters/5.28 gallons of paint for 2000 sq/ft. High-quality Viking Purified Raw Linseed Oil with Falu Style Paintģ lb bag of (red or black) dry powder makes approximately 1.5 gallons Store as this may lead to drying issues or mildew growth. Note: Avoid generic linseed oil from the hardware ![]() Apply with stiffīristle brush in thin, even coats. This will also create ideal paint consistency. Mixing blade affixed to a drill for best (and quickest) results. Pockets of pigment or lumps in the paint, use stick mixer or paint Preferable to mix outdoors but protectedįrom wind/rain. Linseed oil soap in a small amount of warm water to help dissolve,Īdd to paint mixture and stir well. In large container add the cold water, slowly pour in powder and Includes traditional Falu Red paint brush.Ī time-tested paint recipe for exterior wood siding. ![]() Strongly suggested to use a Purified Linseed Oil with Falu Pigments for Do not apply over a modern acrylic, latex, petrochemical coating. Information and application suggestions to learn It is easy to use and a very economical, long-lasting protective coatingĪpplied to bare or weathered wood surfaces. The use of Falu or Falun paint dates back hundreds of years in Scandinavia.
0 Comments
Leave a Reply. |